700 Series Lawn Tractor
86
Parking brake
The parking brake is operated by small lever on the
left side of the dash panel. The label describes one end of
the lever’s travel as “ON”, and the other end as “RUN”.
Moving the lever up to the “RUN” position allows the
brake pedal to come up, releasing the brake and engaging
the drive belt.
Depressing the clutch / brake pedal and moving the
lever back to “ON” locks the pedal down.
See Figure 6.25.
The lever moves an adjustable rod that moves the
latch assembly.
See Figure 6.26.
The latch assembly should be adjusted so that it
depresses the plunger on the park brake switch, and locks
the pedal down.
Figure 6.25
to ON
Pedal down
Figure 6.26
Adjustable rod
Latch assembly
FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
