MTD GCS46 - Page 39

39
CHAIN SAW OPERATING MANUAL
GB
Do NOT start the chainsaw hold-
ing it with the hand alone
ATTENTION to the possibility of the
chain moving.
7) Fully press down the air knob (choke) (fig.
30), so that the “THROTTLE ADVANCE”
remains engaged.
ENGLISH
Fig.29
Fig.26
1
STOP
Fig.27
1
1
2
3
Fig.30
1
2
Fig.28
8) Continue to pull the starter cord (fig. 29) until
the engine starts.
CAUTION-HAZARD! The cutting chain
moves because the throttle trigger is
partially advanced.
- Hold the chainsaw firm (Fig.29) letting the
engine and chain run for at least 15 seconds
(for pre-heating).