14
● Only use this product on your own skin.
● Remove any makeup prior to use (it cannot be used for removing makeup).
● Make sure the brush head is securely mounted before use.
(1)
Wet your face with warm or cold
water. Lather the face wash with
your hands or a net and apply
the foam to your face.
(2) Hold below the power switch
and lift the main unit off the
charging stand.
● Hold the silver part (ion electrodes)
on both sides below the power
switch to allow ions to flow through
the brush. Always hold the silver
part with bare hands when using
.
● Clean your hands of the face wash
to avoid slipping.
Ion electrode
(3) Wet the entire brush.
To Next Page
Loading...
