MTS Systems FlexTest SE Service Information

Model 493.02 Controller Service
Calibrating an LVDT
Calibration
122
7. On the Linearization Data window, enter the dial indicator and
conditioner feedback readings for all command points previously
recorded.
Stand-Alone— Path: Setup > Disp > Calibration > Cal Type >
Gain/Linearization > Linearization Data
Automated— Click Linearization Data on the Calibration tab
to open the Linearization Data window.
8. Turn on system hydraulics.

MTS Systems FlexTest SE Specifications

General

Brand	MTS Systems
Model	FlexTest SE
Category	Controller
Language	English