EasyManua.ls Logo

MTX Thunder Axe High End Component TXC5.1 User Manual

MTX Thunder Axe High End Component TXC5.1
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S MANUAL
TXC6.1, TXC5.1, TXC4.1
MTX.COM
MTX002049 TXC Owners Manual.indd 1MTX002049 TXC Owners Manual.indd 1 4/6/05 3:30:41 PM4/6/05 3:30:41 PM
Question and Answer IconNeed help?

Do you have a question about the MTX Thunder Axe High End Component TXC5.1 and is the answer not in the manual?

MTX Thunder Axe High End Component TXC5.1 Specifications

General IconGeneral
Speaker TypeComponent
Power Handling (RMS)100 Watts
Power Handling (Peak)400 Watts
Impedance4 Ohms
Sensitivity90dB
Woofer Size5.25 inches
Tweeter Size1 inch
TweeterSilk Dome
WooferPolypropylene Cone

Summary

Specifications

Before Starting

Installation Tools and Safety Precautions

Lists required tools and emphasizes safety precautions for DIY installations.

Removing the Door Panel

Procedure for safely removing vehicle door panels to access speaker mounting locations.

Tweeter Mounting

Surface Mounting

Guidance on mounting tweeters directly onto a surface using provided hardware.

Flush and Angle Mounting

Instructions for installing tweeters recessed into a surface or angled for optimal sound.

Midrange Mounting

Mounting Considerations

Instructions for mounting midrange speakers in baffles or plates for sound isolation.

Three Way System Configuration

Crossover Mounting and Wiring

Crossover Mounting Location

Advice on selecting an accessible and protected location for the crossover unit.

Wiring Considerations

Guidance on using appropriate gauge wire and routing for optimal performance.

Crossover Connections and Function

Explanation of the 2-way crossover network and its role in frequency distribution.

Bi-Amp Configuration

Bi-Amp Wiring Setup

Instructions for connecting separate amplifiers to the tweeter and woofer for independent power.

Gain Matching and Adjustment

Importance of matching amplifier gains and using crossover settings for final tuning.

Off-Axis and Tweeter Adjustments

Three Level Off-Axis Adjustment

Using crossover settings to compensate for mounting locations and improve imaging.

Tweeter Attenuation Adjustment

Adjusting tweeter output level for optimal balance with the midrange driver.

Warranty Statement

Related product manuals