Need help?Do you have a question about the MTX Thunder Elite TE604 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| RMS Power at 4 Ohms | 75W x 4 |
| Frequency Response | 10 Hz - 30 kHz |
| THD at Rated RMS Power | < 0.05% |
| Input Sensitivity | 200 mV - 4 V |
| Bridged RMS Power at 4 Ohms | 200W x 2 |
| Crossover Frequency | 50 Hz - 250 Hz |
| Bass Boost | 0 dB - 18 dB |
| Crossover | Variable Low Pass/High Pass |
Allows selection of the illuminated logo color on the amplifier unit.
Controls activation of effects and enters demo mode via a hold function.
Selects between 2-channel or 4-channel input signals for proper routing.
Sets up the mono output mode, including impedance requirements.
Adjusts the input signal level for the front channels of the amplifier.
Controls the front channel crossover type and high-pass frequency settings.
Adjusts the input signal level for the rear channels of the amplifier.
Controls rear channel crossover, low-pass, and high-pass frequency settings.
Guides setting input sensitivity for RCA or speaker-level inputs.
Controls the overall output volume level for the amplifier channels.
Outlines the 3-year limited warranty terms and conditions for MTX amplifiers.
