Need help?Do you have a question about the MTX Thunder TA Super TA81001 and is the answer not in the manual?
General| Brand | MTX |
|---|---|
| Model | Thunder TA Super TA81001 |
| Category | Car Amplifier |
| Language | English |
Disconnect the vehicle's negative battery cable prior to installing the amplifier.
Route the power cable through the StreetWires Firewall Bushing for protection.
Ensure a secure ground connection to bare metal of the vehicle chassis.
Connect the remote turn-on wire to the source unit's power antenna wire.
Connect RCA cables for audio signal and the remote turn-on wire to the amplifier.
Connect speaker wires from the amplifier outputs to the speaker terminals, minding impedance.
Connect amplifiers to the 1st and 2nd voice coil terminals for strapped operation.
Mount the External Bass Control (EBC) on the dashboard or within easy reach.
