MTZ 900 - Page 174

Maintenance
MTZ series 900
174
End of the Table
No.
Subject of maintenance
Check
Cleaning
Lubrication
Replacement
Adjustment
Drain
Flushing
Remarks
Maintenance after each 2000 hours of operation
42
Front wheel bearings (MTZ-
900/900.3/950/950.3)
+
+
43
Steering rod joints
+
+
44
Angle brace of the mounted at -
tachment mechanism
+
45
Shaft bushing of the mounted
attachment mechanism
+
46
External bolt joint of the
tractor
+
47
Oil in the hydraulic system tank
+
47а
Oil in the HPS tank
+
48
Transmission oil
+
48а
Oil in the casings of the “wet”-
type brakes (if provided)
+
49
Oil in the FDA casings
and intermediate support
+
50
Flange bearings of FDA
p l a n etary reducing gears
+
+
51
Engine oil primary filter
+
+
52
Engine breather
+
53
Engine injectors
+
+
54
Fuel pump. Injection lead
angle
+
+
55
Fuel pump. Adjustment at the
test bench
+
+
56
Diesel engine cooling system
+
+
57
Starter
+
General maintenance
58
Valve of centrifugal oil filter
+
1) If the air-conditioner is provided.
2) In winter, the action shall be performed after each 10 hours of operation and in summer – after each
125 hours of operation.
3) The action should be performed after each 250 hours of operation.
4) For turbocharged diesel engines, change oil after each 250 hours of operation. In case of use the sum-
mer diesel fuel with the sulphur content of 1%, the intervals of change of oil in the engine crankcase
should be halved.
5) The first change shall be performed after 500 hours, the subsequent ones – after each 1000 hours of
operation as well as when performing the seasonal maintenance.
6) After each 800 hours of operation or once a year.