*
Only used for tractors with independent power cylinder of HMS (with power governor).
The fixing mechanism (2) is in-
tended for fixing the mounted attachment
in the transport position to prevent the
mounted implements from lowering.
Applying this mechanism ensures the
mechanical locking of the rotary lever (3)
fitted on the rotary shaft (5), and, respec-
tively, lifting levers of the mounted at-
tachment (4) fitted on the same shaft.
To fix the hanging, lift it to the uppermost
position and then turn the handle (1) to the
left as far as it will go.
To disengage the fixing mechanism, put
the handle of the power governor to the
“lift” position to release the fixation gear
from the load and then turn the handle (1)
to the right as far as it will go.
To Next Page
Loading...
