MTZ 952.2 - Control of the rear axle differential lock (1)

Controls and Instrumentation
MTZ series 900
39
PTO control lever
The PTO control lever (1) has two posi-
tions:
• PTO OFF – front position of the lev-
er (1);
• PTO ON – back position of the lever
(1).
Control of the rear axle differential
lock (1)
To engage shortly the lock press pedal
(1).
IMPORTANT! Engage the forced differ-
ential lock (1) only shortly to overcome
road obstacles and carry out the field
and transportation works.
WARNING: Do not use the differential
lock at the speeds exceeding 10 km/h
and when turning the tractor. Other-
wise the tractor control becomes diffi-
cult and running gear and power
transmission are quickly worn out.