2
power. To turn on again Wi-Fi, simply power the camera OFF
then ON again.
NOTE: An active Wi-Fi connection will affect total recording
time.
When the main unit connects USB cable for charging, the main
unit will power on automatically and turn on Wi-Fi. It’s workable
to connect app for setting camera or checking recorded files.
Idle for 3 minutes, the main unit will power off automatically.
Unplug and plug the USB cable once again to re-start the main
unit.
Recommend to use microSD card V30 or higher and capacity
16GB or higher (up to 128GB).
Format microSD card regularly and synchronize date/time.
(Recommended: Once per month.)
In a high humidity environment or when travelling between
areas with a large temperature difference, light moisture or
fog may appear on the lens. This is normal. If this happens,
remove the microSD card, and remain the microSD card
slot cover opening, let the microSD card slot faces up for
several hours until the internal moisture or fog evaporates,
and then reinsert the card and resume use.
The friction scratches caused by the regular buckle of the main
unit mount are normal and do not affect the use. Due to the
production test, the main unit mount will have some
micro-friction scratches. This is normal.
To avoid the product damage or accidents from product
dropping, install the product properly and solid before take a
ride.
Due to the various specifications of memory cards on the
market, and the quality is uneven, we do not guarantee that all
memory cards are compatible with our products. If there is a
memory card abnormality, resulting in the inability to store
recorded images, It’s not directly related with the dashcam.
Please swap the new card from where you purchased.
To Next Page
Loading...