This document is the user manual for the MUJI Stand for Wall Clock and Wall Mounted CD Player, Silver, Model Number MJ-1601. It provides essential information for safe and correct assembly and usage of the product.
Function Description
The MUJI MJ-1601 stand is designed to provide a stable base for various MUJI products, including wall clocks, hanging clocks, wall-mounted CD players (CPD-2, CPD-3, CPD-4), and wall-mounted Bluetooth speakers (MJBTS-1). It allows these devices to be placed on a horizontal surface rather than being mounted directly to a wall, offering flexibility in placement. The stand features a central column with multiple screw holes to accommodate different sizes and hanging positions of clocks, and a specific mounting plate for the CD players and Bluetooth speakers.
Important Technical Specifications
- Model Number: MJ-1601
- Dimensions: 10cm wide x 15cm long x 28cm high (3.94in wide x 5.91in long x 11.02in high)
- Weight: Approximately 800g (1.76lb)
- Materials: STEEL
- Included Parts:
- Main Unit (the stand itself)
- For Wall Clock: 1 x M4 x 25 installation screw
- For Wall Mounted CD Player / Bluetooth Speaker: 4 x M4 x 15 installation screws
- Compatibility:
- MUJI Wall Clocks
- MUJI Hanging Clocks
- MUJI Wall Mounted CD Player (CPD-2, CPD-3, CPD-4)
- MUJI Wall Mounted Bluetooth Speaker (MJBTS-1)
- Assembly Tool Required: Phillips head screwdriver (equivalent to JIS #2; 6mm diameter)
Usage Features
The stand offers two primary usage configurations:
1. For Wall Clock and Hanging Clock:
- Installation: Users select one of the nine screw holes located along the center of the stand's column. The M4 x 25 installation screw is then used to secure the clock to the stand. The choice of screw hole depends on the size and desired hanging position of the clock.
- Adjustment: The manual emphasizes adjusting the screw's protrusion distance according to the clock's user manual. If the clock leans forward after hanging, the protrusion should be adjusted, ensuring enough protuberance for secure hanging.
2. For Wall Mounted CD Player and Wall Mounted Bluetooth Speaker:
- Installation: This configuration requires the use of a wall mount plate (not explicitly shown as an included part of the stand, but implied to be part of the CD player/Bluetooth speaker accessories). Four M4 x 15 installation screws are used to attach this wall mount plate to the main unit of the stand.
- Device Attachment: Once the wall mount plate is secured to the stand, the Wall Mounted CD Player or Wall Mounted Bluetooth Speaker can then be installed onto this plate.
- Directionality: The wall mount plate for these devices has a specific installation direction, which must be followed as per the instructions in this manual and the respective device manuals.
- Screw Holes: The stand features four specific screw holes (two on the left and two on the right) designed for the wall mount plate of the CD player and Bluetooth speaker.
Maintenance Features
The manual primarily focuses on safe assembly and usage rather than ongoing maintenance. However, it implicitly suggests that proper initial assembly is key to the product's longevity and safe operation.
Safety Advice and Cautions
The manual provides extensive safety advice, categorized into "Warning" (potential for death or serious injury) and "Caution" (potential for damage or injury).
Warnings:
- Stability: Do not use the stand on unstable, unbalanced, slanted, or slippery surfaces (e.g., end of a table or shelf). This could lead to the product falling, causing injury or damage.
- Screw Direction: Do not insert screws in the opposite direction from what is shown in the assembly instructions, as this can cause the product to fall, resulting in injury or damage.
Cautions:
- Compatibility: The stand is specifically designed for MUJI Wall Clocks, Hanging Clocks, Wall Mounted CD Players (CPD-2, CPD-3, CPD-4), and Wall Mounted Bluetooth Speakers (MJBTS-1). Using it with other brands or models of clocks, CD players, or Bluetooth speakers is not recommended for safety.
- Installation Environment: Users must follow the instructions regarding the usage and installation environment provided in this manual and the respective manuals for the devices being mounted.
- Assembly Tool: A Phillips head screwdriver (JIS #2; 6mm diameter) is required for assembly.
- Clock Screw Adjustment: For clocks, the screw protrusion distance must be adjusted according to the clock's user manual. If the clock falls forward, the protrusion needs adjustment, ensuring sufficient protuberance for secure hanging.
- CD Player/Bluetooth Speaker Installation: The wall mount plate for these devices has a specific installation direction that must be followed. Users should refer to the respective user manuals for detailed installation instructions for the CD player and Bluetooth speaker.
Overall, the MUJI MJ-1601 stand is a versatile accessory designed to enhance the placement options for specific MUJI devices, emphasizing user safety and correct assembly procedures.
To Next Page
Need help?
General
