17
Pipe placement on base
Get that snagging hose up outta
da way. Replace Dust Hood with
Hose Adapter to attach to pipe.
Say goodbye to snags and
hello to easy drags.
Optional: Use the included Self-Drilling
Screws to more securely attach your Boom
Arm Pivot or Hose Adapter to Pipe.
Optional
WARNING
Assembled Boom Arm pieces
can detach falling on user,
especially if suspended
overhead. Ensure a proper
friction t is achieved by
rmly pressing parts onto pipe
and Cyclone inlet (if applicable).
Use included Self-Drilling Screws
to lock parts in place.
To Next Page
Loading...