Multibrackets M User Manual

1. Disconnect your M Motorized Projection Screen from the electricity power
supply.
2. Slightly press the "Down" button on the wall receiver for 5-6 seconds.
3. Connect your M Motorized Projection Screen to the electricity power supply.
4. Slightly press the "Up" button.
5. Press any key of the remote control pointing it at the wall receiver.
6. The clicking sound ensures that your remote control and wall receiver are
now synchronized.
Remote & Wall Receiver Synchronization
Please follow the steps below to synchronize your remote
control and wall receiver.

Multibrackets M Specifications

General

Brand	Multibrackets
Model	M
Category	Projection Screen
Language	English