139
www.multilaser.com.br
default MTU Size unless required by your ISP.
• Service Name/AC Name – The service name and AC (Access Concentrator) name should not be configured unless you
are sure it is necessary for your ISP. In most cases, leaving these fields blank will work.
• ISP Specified IP Address – If your ISP does not automatically assign IP addresses to the Router during login, please click
“Use IP address specified by ISP” check box and enter the IP address provided by your ISP in dotted-decimal notation.
• Detect Online Interval – The Router will detect Access Concentrator online at every interval. The default value is “0”. You
can input the value between “0” and “120”. The value “0” means no detect.
• Primary DNS/Secondary DNS – If your ISP does not automatically assign DNS addresses to the Router during login,
please click “Use the following DNS servers” check box and enter the IP address in dotted-decimal notation of your ISP’s
primary DNS server. If a secondary DNS server address is available, enter it as well.
Click the Save button to save your settings.
4. If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable. And you should enter
the following parameters (Figure 4 11):
• User Name/Password – Enter the User Name and Password provided by your ISP. These fields are case-sensitive.
Figure 4-11
To Next Page
Loading...