The servoside mixers are the key to getting the best out of your Profi and are significantly
different from the control mixers found on most other radios. In the Profi the mixers are created
either from scratch or using the supplied editable templates and then assigned to outputs. Each
mixer can have a total of 8 control inputs and each model memory can have 5 servoside mixers
which can be used multiple times, i.e. you only need one Aileron+ mixer for 2 or 4 separate
aileron surfaces. The first step in using the mixers is to edit one of the presupplied templates or
create your own, this is done in the Define Mixer tab under Setup (ABC1)
Here the mixer list includes supplied templates for Elevator, V-Tail, Ailerons, Flaps Inner and
Centre and two blank templates, 7 showing when you scroll down, to change any mixer settings
scroll down to the mixer and enter. Note the above mixer list is the standard mixer templates
loaded for the Glider+ template loading when selecting a new model.
Profi – Mixers
Servoside Mixers
To Next Page
Loading...
