EasyManua.ls Logo

mundoclima MU-ECO Series User Manual

mundoclima MU-ECO Series
8 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CORTINA DE AIRE
con calefacción
Serie MU-ECO
MUND
CLIMA
®
ES
EN
Question and Answer IconNeed help?

Do you have a question about the mundoclima MU-ECO Series and is the answer not in the manual?

mundoclima MU-ECO Series Specifications

General IconGeneral
Brandmundoclima
ModelMU-ECO Series
CategoryHeater
LanguageEnglish

Summary

Instruction Cautions

Installation Environment Requirements

Specifies elevation below 1000m, ambient temperature over -10°C to below 50°C, and humidity up to 95%.

Installation Location and Stability

Install on a solid place to avoid vibrations and at least 2.3m above ground for indoor use.

Multi-Unit Mounting Spacing

Details mounting several units side-by-side with 20-50mm space between each unit.

Prohibited Installation Conditions

Avoid installing in areas with high temperature, humidity, explosive gas, or corrosive materials.

Professional Installation Advice

Recommends consulting a specialist for selecting the appropriate wire and switch.

Installation Procedure

Mounting Plate Removal

Step detailing how to unscrew and detach the mounting plate from the air curtain unit.

Mounting Plate Installation

Instructions for inserting mounting bolts into a cement wall and attaching the mounting plate.

Air Curtain Mounting

Guidance on screwing the air curtain securely onto the mounting plate and checking its stability.

Operation

Remote Control Operation

Instructions for operating the unit using the remote control for normal and warm air modes.

Direct Receiver Operation

Steps for selecting desired air mode (Warm/Normal/Off) directly via the receiver.

Maintenance and Repair

Safety Precautions for Maintenance

Unplug the unit before any checks and keep electrical parts away from moisture.

Cleaning Instructions

Regular cleaning recommended; use mild detergent and a cloth for dust removal.

Professional Disassembly

Emphasizes that detaching the unit should only be performed by qualified professionals.