Why does my mundoclima MUP-HK smell after starting?
The unit itself doesn't produce any peculiar smell. The odor you're experiencing might be due to accumulated smells in the environment. Try cleaning the filter. If the problem persists after cleaning the filter, it may be necessary to clean the air conditioner. In this case, please contact an authorized maintenance center.
Why does my mundoclima MUP-HK Heat Pump make creaking noises when starting or stopping?
The creaking noise you hear when starting or stopping your mundoclima Heat Pump is due to the deformation of plastic components caused by temperature changes.
Why won't my mundoclima MUP-HK Heat Pump operate immediately after being stopped?
After being stopped, your mundoclima Heat Pump will not operate for approximately 3 minutes. This is a protective measure for the unit.
Why can I hear water flowing in my mundoclima MUP-HK?
The swooshing or gurgling sound you hear in your mundoclima Heat Pump is due to the refrigerant flowing when the compressor starts or stops, or when the unit is stopped. This is normal and not a malfunction.
General| Brand | mundoclima |
|---|---|
| Model | MUP-HK Series |
| Category | Heat Pump |
| Language | English |
Explains cooling principles, anti-freezing, heating principles, and defrosting.
Details the anti-cool wind feature in heat mode to prevent blowing cold air.
Explains the gentle breeze function and specific operating conditions.
Covers general button functions, operation modes, and temperature/fan speed settings.
Explains timer functions, special buttons (+/-), and temperature unit switching.
Provides step-by-step guides for general/optional operations and introduces special functions.
Details defrosting function, battery replacement, and emergency operation.
Instructions for cleaning the front panel of the indoor unit.
Recommended procedure for cleaning the air filters every three months.
Covers essential pre-operation checks and post-use maintenance steps.
Addresses issues like delayed operation, unusual smells, water sounds, and mist emission.
Diagnoses problems related to the unit not running or reduced cooling/heating efficiency.
Covers remote control unavailability, water leakage, and noise troubleshooting.
Addresses issues with indoor unit air delivery, moisture on vents, and critical situations.
To Next Page
