3-92
Unique Switch 17 — Transmission
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 1 JBIG transmission
0: No
1: Yes
Determines if the JBIG transmission is available.
0 0 Factory use only
Unique Switch 18 – Transmission
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 1 Factory use only
4 0 Disconnect the line when the
transmission speed falls
down under 7200 bps
0: No
1: Yes
Determine if the machine disconnect the phone line
when the transmission speed fall down under 7200
bps.
3 0 Disconnect the line when the
transmission speed falls
down under 4800 bps
0: No
1: Yes
Determine if the machine disconnect the phone line
when the transmission speed fall down under 4800
bps.
2 0 Factory use only
1 1 Factory use only
0 0 Transmission when disable to
detect first NSF in real time
transmission.
0: Retry to detect NSF
1: Transmit with the standard
protocol
Determines the action when disable to detect first
NSF in real time transmission.
Unique Switch 19 – Factory use only
To Next Page
Loading...
Need help?
General
