3-8 LDAP server settings
21
If the LDAP server requires login information (an account and passcode), press
[Yes]. Otherwise, press [No]. Then press [Enter].
22
When the optional “OfficeBridge Expansion Kit” has been installed on your
machine, press [User Login]. Otherwise, go to step 24.
NOTE: If the optional “OfficeBridge Expansion Kit” has not been installed, this setting
should be set to “NO”.
23
Press [YES] and press [Enter].
NOTE: When the “User Login” setting is set “Yes”, the “Account” and “Passcode” cannot
be entered.
To Next Page
Loading...
Need help?
General
