3-10 LDAP server settings
27
Using the numeric keypad enter the maximum number of search results you
want to display and press [Enter].
The number can be entered within the range of 001-100.
The default number is 50.
28
Press [Time Limit].
29
Using the numeric keypad enter the maximum amount of time you want the
machine to search the LDAP server for and press [Enter].
The time can be entered within the range of 0000–9999 seconds.
The default setting is “0000” (unlimited setting).
NOTE: If you do not want to make a time limitation, enter “0000”.
To Next Page
Loading...
Need help?
General
