1
2
3
4
Advanced Fax Functions
F-Code Communications 4-27
To set a password, press [Password].
12
If you do not want to set it, proceed to step 14.
Enter the password using the numeric keys, and press [Enter].
13
Press [Enter].
14
To continue to register or edit Secure
F-code boxes, repeat the procedure in steps 4 to 13.
Registering / Editing F-Code Bulletin Boxes
This section describes the procedure for registering F-code bulletin boxes. When editing,
select the box you want to edit in step 4, and press [Edit]. If an I.D. code is set, enter the I.D.
code. Select the item you want to edit.
Press <Setting>.
1
Press [Register].
2
Press [F-Code Box].
3
Press [Add].
4
When editing, select the box you want to edit, and press [Edit].
To Next Page
Loading...
Need help?
General
