1
2
3
4
5
Specifying Destinations
Confirming Specified Destinations 5-19
Confirm the destinations, and press [Enter].
2
(Example: Scanner screen)
To delete a selected destination, select the destination to delete, and press [Delete].•
For an e-mail address, you can change the destination to a “To”, “Cc”, or “Bcc” destination. •
Press the box for the destination you want to change to switch to a “To”, “Cc”, or “Bcc”
destination. You can press [Sort] to sort the destinations in order of “To”, “Cc”, or “Bcc”.
Checking Destinations with the Confirm Destination Function
When the confirm destination function is enabled, a screen for confirming or deleting the
destinations is displayed when you press <Start> after specifying the destinations.
For details on setting the confirm destination function, refer to Chapter 2, “Confirming
the Destination Before Transmission” in the Administrator’s Guide.
A screen for confirming or deleting the destinations is displayed when you press
1
<Start> after specifying the destinations. Confirm the destinations, and press
<Start> again.
(Example: Scanner screen)
To delete a selected destination, select the destination to delete, and press [Delete].•
F• or an e-mail address, you can change the destination to a “To”, “Cc
”
, or “Bcc”
destination. Press the box for the destination you want to change to switch to a “To",
“Cc”, or “Bcc” destination.
When you select a destination from the address book, the confirmation screen is displayed •
without pressing <Start>.
To Next Page
Loading...
Need help?
General
