2-18 Advanced Scan Features
Select the saturation, and press [Enter].
5
Press [Close] twice.
6
Specify the destination, and press <Start>.
7
For details on the procedure, refer to “Basic Scanning”. (See page 1-2.)
Adjusting the Lightness
You can set the image lightness (brightness and darkness) to seven different levels, from
-3 (low) to +3 (high).
-: Darkens the entire image.
+: Lightens the entire image.
-3 -2 -1 0 +1 +2 +3
To Adjust lightness, set the contrast to “Normal”. (See page 1-21.)
Load the document, and press <Scan>.
1
Press [Advanced].
2
Press [Color Adjust].
3
To Next Page
Loading...
Need help?
General
