1
2
3
4
5
6
7
Device Settings
Registering Destinations 7-5
Enter the name, and press [Enter].
9
Up to 30 characters can be entered.
10
Press [Speed-Dial].
If you do not want to edit the speed-dial, proceed to step 12.
Enter the search number, and press [Enter].
11
You can not overwrite the search number that has already been registered.
Press [Super G3].
12
Select [ON] to enable transmission with Super G3 or [OFF] to disable it, and
13
press [Enter].
Press [Close].
14
To continue to register address book destinations, repeat the procedure for steps 4 to 14.
Refer to Chapter 2 “Activating the PIN mask” in the Administrator’s guide, how to set
the PIN mode.
To Next Page
Loading...
Need help?
General
