1
2
Advanced Scan Functions
Advanced Scan Features 2-11
Scanning the Next Document (Next Doc.)
You can transmit or save separate documents scanned in a row as a single set of data.
Since you can scan using both the document glass and the ADF, this is useful for
transmitting / saving a combination of documents such as an invoice and a map together.
The next document settings can be set separately for the ADF and the document glass
(FBS).
Load the document, and press <Scan>.
1
Press the [Advanced] tab.
2
Press [Next Document Setting.].
3
Select [ON], and press [Enter].
4
If you select [OFF], the next document setting is disabled.
Specify the destination, and press <Start>.
5
For details on the procedure, refer to “• Basic Scanning”. (See page 1-2.)
When the loaded documents have been scanned, the message “Set next document” is •
displayed.
Load the next document to scan.
6
To Next Page
Loading...
Need help?
General
