2-18 Advanced Scan Features
Press [Close].
6
Specify the destination, and press <Start>.
7
For details on the procedure, refer to “Basic Scanning”. (See page 1-2.)
Adjusting the Saturation
You can set the image saturation (the color vibrancy) to seven different levels, from -3 (low)
to +3 (high).
-: Lessens the color to make the image closer to grayscale.
+: Enhances the color to make the color of the image more vibrant.
-3 -2 -1 0 +1 +2 +3
To Adjust saturation, set the contrast to “Normal”. (See page 1-20.)
Load the document, and press <Scan>.
1
Press the [Advanced] tab.
2
Press [Color Adjustment].
3
Press [Saturation].
4
To Next Page
Loading...
Need help?
General
