Muratec MFX-3510 Printer Guide

1
2
3
4
5
Barcode / OCR Font Settings
Sample of barcode / OCR font use 5-13
Sample of barcode / OCR font use
The surrounding blank area and caption are not included in the following example.
Escape code <ESC> and carriage return code <CR> are required for code value input.
The value of nn is a hexadecimal digit for items listed as <Hexnn>. Input for the
corresponding code is required.
Generally for these samples, first a position set command is needed to choose the
preferred Barcode font. Afterwards, this position set command is needed to return to the
general text font from the Barcode font.
UPC-A
Data to be displayed
03600029145(Check Digit 2)
<ESC>(8Y<ESC>(s12vbs24600T(036000-CJBEFC(<CR>
UPC-E
Data to be displayed
654321 (Check Digit 7 in EOEOEO:E(Even), O (Odd))
<ESC>(8Y<ESC>(s12vbs24600T(g5e3c1)<CR>
EAN13
Data to be displayed
491234567890 (The prefix for 4 in OEOOEE, Check Digit 4)
<ESC>(8Y<ESC>(s12vbs24630T(9b23ef-GHIJAE(<CR>
EAN8
Data to be displayed
4912345 (Check Digit 6)
<ESC>(8Y<ESC>(s12vbs24620T(4912-DEFG(<CR>
Interleave25
Data to be displayed
0400763000011 (Check Digit 6)
<ESC>(4Y<ESC>(s12vbs24640T<HexAB>%!m?!"1<HexAC><CR>
Code39
Data to be displayed
01234567890123 (Check Digit 8)
<ESC>(0Y<ESC>(s12vbs24670T*012345678901238*<CR>
Code128
Data to be displayed
<StartC><FNC1>123456<CodeB>A1(Check Digit C)
<ESC>(19Y<ESC>(s12vbs24702T<HexAB><HexA8>,BX<HexA6>A1C<HexAE><CR>
Postnet
Data to be displayed
123456789 (Check Digit 5)
<ESC>(15Y<ESC>(s12vbs24771T1234567895<CR>

Muratec MFX-3510 Specifications

General

Brand	Muratec
Model	MFX-3510
Category	Copier
Language	English