Manual for MVK-MPNIO Modules
V 1.9 45
4.2.3 Parameterization of Fast Start-Up
I
n some applications, e.g. a tool change on robots, it is essential to have a fast start-up of the module.
Al
l MVK-MPNIO's support the prioritized start-up specified by PROFINET from firmware Version 3.00 or
higher (FSU - Fast Start-Up).
The hardware of the modules 55256, 55257, 55264, 55268 55269, and 55339 is optimized. These mod-
ules achieve start-up times of <500 ms.
T
he modules 55283, 55287, 55288 and 55289 achieve start-up times of >500 ms.
In the first step, activate the MVK-MPNIO for prioritized start-up. This is done in the "Properties" window
of socket X1. Tick the box "Prioritized start-up" in the "General" tab (see figure below).
30. P
arameterization of Fast Start-Up
To Next Page
Loading...