Manual for MVK-MPNIO Modules
V 1.9 47
4.2.4 Topology Setting
PR
OFINET offers various functions, diagnostic and maintenance options that are based on the existing
topology. All MVK-MPNIO modules support the topology setting and the automatic topology recognition
by the engineering tool.
Below we give an example of how to set the topology for MVK-MPNIO modules.
Setting the connected adjacent devices is performed via the ports X1 P1 and X1 P2, which represent the
physical interfaces.
I
n the "Topology" tab, "Partner Port", there is a list of all possible ports of other devices contained in the
project.
32. S
etting the topology
To Next Page
Loading...