Manual for MVK-MPNIO Modules
48 V 1.9
4.2.5 Identification of Individual Devices in the Network
T
he identification of PNIO devices is performed using their MAC address and the device type. If
you want to install several modules of the same type, they have to be clearly differentiated.
33. Identifying individual devices in the network
All modules available in the network can be loaded and selected using the configuration tool. Use the
path below in the HW config to search the network for accessible devices.
Target system
Ethernet Edit Ethernet node Search
Identification is made using a blink test. This test causes the LINK LED of the selected MVK MPNIO to
flash at a rate of 2 Hz. Mark an available device and select the Flash option.
F
actory settings of the MVK-MPNIO
- MA
C address: 00-0F-9E-xx-xx-xx
- IP address: 0.0.0.0
- Device type: MVK PROFINET
- Name of device: The device name is unassigned in the factory settings.
To Next Page
Loading...