Manual for MVK-MPNIO Modules
8 V 1.9
Qualified Personnel
Requirements to be met by qualified personnel are based on qualification profiles described in
ZVEI and VDM guidelines.
O
nly qualified electricians that are familiar with the contents of this manual may install and ser-
vice the products described: "Weiterbildung in der Automatisierungstechnik" (Further Training in
Automation Engineering), published by ZVEI and VDMA in the Maschinenbau-Verlag, P.O.Box
710864 in D-60498 Frankfurt, Germany.
T
hese are specialists who are capable of assessing the work to be done and the possible dan-
gers on account of their technical training, knowledge, experience, and knowledge of the rele-
vant standards; or who have an identical level of knowledge equivalent to technical training
since they have worked in the same area for many years.
I
nterventions in the hardware and software of our products, if not described in this manual, may
only be carried out by Murrelektronik specialists.
Unqualified alteration of hardware or software, or disregard of the warnings
given in this manual, may result in personal injury or serious damage to
property.
To Next Page
Loading...