Mounting
User manual 57120_hdb_en_12 22 / 70
5.2.1 Functional principle of the locking
Inserting and locking the module
The terminal module has a locking lever at its top.
1 | For installation and disassembly, please press this locking lever upwards
until it engages audibly.
2 | Plug the module to be mounted in the previously plugged-in module.
3 | Slide the module with the help of the guide strips at top and bottom onto
the DIN rail.
4 | Flap the locking lever downwards.
The module is fastened to the DIN rail.
To Next Page
Loading...
