MASI65-M12 User's Manual
V 1.1 9
1.3 Regulations
Current safety and accident prevention laws valid for a specific application must be observed in the con-
figuration, installation, setup, maintenance and testing of the equipment.
1.3.1 EU directives
This equipment fulfills the requirements of EC directive 89/336/EEC
„Electromagnetic compatibility".
There are no restrictions to applications in residential, business and industrial areas, including industrial
facilities large and small.
1.3.2 Electrical safety
All devices connected to this equipment must fulfill PELV directives (Protected Extra Low Voltage)
according to HD 384.4.41.
1.3.3 General information
a) The designated function of this equipment is guaranteed only if the conditions for installation, sys-
tem extension, operation and maintenance are complied with.
b) Only system extensions and cables are allowed with meet the requirements and regulations for
safety, electromagnetic compatibility and, where applicable, telecommunications transmission
equipment and specifications.
The installation of other extensions may violate these requirements and regulations or damage the
equipment.
Information concerning the type of system expansions and cables that are permitted, can be ob-
tained either from your Murrelektronik distributor or taken from this manual.
c) The designated operation of the equipment is guaranteed only with the housing fully installed.
d) This product is designed and manufactured to assure protection against damage if designated
usage and proper maintenance are observed.
To Next Page
Loading...