Murr Elektronik MASI65-M12 Series - Information Regarding Standards; Equipment Standards; EMC Standards; Safety Standards

MASI65-M12 User's manual
10 V 1.1
1.4 Information regarding standards
1.4.1 Equipment standards
- EN 50295 Low voltage switching devices – Control systems and device interfaces – Actuator
Sensor Interface (AS-I).
- EN 60 947-1 Low voltage switching devices
Part 1 : General conventions.
1.4.2 EMC Standards
- EN 50295 Low voltage switching devices – Control systems and device interfaces – Actuator
Sensor Interface (AS-I).
- EN 55011 Industrial, Scientific and Medical high frequency equipment - Radio interference - Limit
values and sensing methods.
- EN 61000-4-2 EMC Part 4 : Testing and sensing methods
Main section 2 :
- Test of immunity to static electrical discharge according to basic EMC standards.
- EN 61000-4-3 EMC Part 4 : Testing and sensing methods
Main section 3 :
- Test of immunity to RF electromagnetic fields.
- EN 61000-4-4 EMC Part 4 : Testing and sensing methods
Main section 4 :
- Test of immunity to rapid transient disturbances/burst - EMC basic standards.
- EN 61000-4-6 EMC Part 4 : Testing and sensing methods
Main section 6 :
- Test of immunity to asymmetric RF input
- EMC basic standard.
- AS-i Complete Specification Version 2.1, Section 8 EMC.
1.4.3 Safety standards
- EN 60 295 Low voltage switching devices – Control systems and device interfaces – Actuator
Sensor Interface (AS-I).
- EN 60 947-1 Low voltage switching devices
Part 1 : General conventions.
- EN 60 529 Type of housing protection (IP-Code).
- VDE 0100 Part 410/HD 384.4.41 Installation of power systems and equipment with nominal voltages
up to 1 000V
Part 4 : Protective measures.
- Chapter 41 : Protection against electrocution.