MASI65-M12 User's manual
8 V 1.1
1 Safety information
1.1 Designated use
The input and output modules of the MASI65-M12 series are designated for use only in those areas as
described in this manual.
Strict adherence to the data specified in this manual must be ensured. The products avec been devel-
oped, manufactured, tested and documented in compliance with current safety codes.
The equipment poses no danger to operating personnel or material if configuration, assembly and opera-
tion are performed in compliance with the stated handling and safety regulations.
Unqualified intervention in the hardware and software of our equipment, disregard of warning labels found
on the equipment or non-observance of the information in this product manual can result in injury or seri-
ous damage to man and/or material.
Only supplementary or extension devices that have been recommended by Murrelektronik may be em-
ployed in conjuction with products of the MASI65-M12 series.
Any application or usage beyond and above this shall be regarded as non-designated.
1.2 Target groups
This manual addresses itself exclusively to qualified and trained electricians knowledgeable in the safety
standards of automation technology.
Only a qualified, trained electrical tradesman knowledgeable in the safety standards of automation tech-
nology may perform configuration, installation, set-up, maintenance and testing of the equipment.
Only Murrelektronik technical personnel are allowed to undertake intervention in the hardware and soft-
ware of our equipment, insomuch as this is not described in this manual.
To Next Page
Loading...