Murr Elektronik Mico Pro Series - Products

Description
User manual 9000-41011-0200000_hdb_en_20 16 / 92
3.2 Products
3.2.1 Mico Pro PS (power supply)
3.2.2 Mico Pro PM (power module)
NOTE
The cover plates for the left and right sides are attached to this module.
3.2.3 Mico Pro PD (power distribution)
Mico Pro Power-Supply (PS)
Designation Article number Function
Mico Pro PS
5-100-240/24
9000-41190-0000105
 Nominal voltage:
100 V ... 240 V
 Voltage range:
90 V ... 265 V
Mico Pro PS
10-100-240/24
9000-41190-0000110  Nominal voltage:
100 V ... 240 V
 Voltage range:
90 V ... 265 V
Mico Pro power module (PM)
Power feeding module for system supply and control options
Designation Article number Function
Mico Pro PM
24 V / 40 A
9000-41190-0000000
 Operating voltage:
12 V , 24 V
 Input voltage range:
9 V ... 30 V
 Total operating current
≤40 A
 Control inputs and outputs
Mico Pro power distribution module (PD)
Potential distributor
Designation Article number Function
Mico Pro PD 2x12 9000-41000-0000212
 Operating voltage potential
12 clamps
 GND / 0 V potential
12 clamps
Mico Pro PD 2x2x06 9000-41000-0002206 Group 1
 Operating voltage potential
6 clamps
 GND / 0 V potential
6 clamps
Group 2
 Operating voltage potential
6 clamps
 GND / 0 V potential
6 clamps