Technical Data
User manual 9000-41011-0200000_hdb_en_20 51 / 92
NOTE
A high-energy impulse (surge) applied to the output of the Mico Pro modules
can cause short-term voltage interruption (max. 3 ms). This protects the con-
nected loads. Mico Pro detects within this time, whether a faulty short circuit
or a high-energy impulse occurred. If there is no short circuit, Mico Pro will be
switched on again.
Characteristics: Tripping current
For Mico Pro fix 1.4 CL2 / 4.4 CL2
Fig. 4-15: Tripping current for Mico Pro fix 1.4 CL2 and Mico Pro fix 4.4 CL2
To Next Page
Loading...