Mounting
User manual 9000-41011-0200000_hdb_en_20 67 / 92
5.2 Installation position
CAUTION!
Material damage caused by wrong installation position!
Module Mico Pro fix 1.16 (9000-41011-1600000) and Mico Pro flex 1.20
(9000-41091-1102000) may only be installed in the following positions.
The device must be installed in the intended position in order to ensure sufficient cool-
ing and mechanical stability.
Fig. 5-2: Installation position
The device must be installed in the intended position in order to ensure sufficient cool-
ing and mechanical stability.
Fig. 5-3: Installation position for Mico Pro fix 1.16 and Mico Pro flex 1.20
To Next Page
Loading...