Installation
User manual 9000-41011-0200000_hdb_en_20 72 / 92
6 Installation
CAUTION!
Risk of hot surfaces due to overload
Excessive total operating current > 40 A may lead to overheating of the mod-
ules or devices and connecting cables and cause hot surfaces.
Power feeding ≤40 A
For this product EPLAN macros are available:
EPLAN macros are in Murrelektronik Onlineshop
"http://shop.murrelektronik.com", associated with the item number
PELV
All channels can be grounded by connecting any GND/0V terminal to PE
(Earth)
Battery operation
For battery operation, the following conditions must be met:
Operating voltage of the battery pack ≥10 V
Supply line between the battery and Mico Pro ≤6 m
Use a suitable backup fuse or a short-circuit proof battery pack
WARNING!
Risk of fire due to short circuit
Without suitable backup fuse or short-circuit protection measures, fires can
occur.
Use a suitable backup fuse or a short-circuit proof battery pack
To Next Page
Loading...