Installation
User manual 9000-41011-0200000_hdb_en_20 73 / 92
6.1 Overview
6.1.1 Mico Pro PS (power supply)
6.1.2 Mico Pro PM (power module)
Fig. 6-1: Installation overview
1 Input terminal
2 GND/0V bridging contact supply
Plug-in link continuous jumper
3 +24V bridging contact supply
Plug-in link continuous jumper
4 Internal system connection
5 I/O signals- CTRL control input
- ON control input
- 90% 23, 24 control output
- Alarm 13, 14 control output
Fig. 6-2: Installation overview
1 +24V terminal power input
2 +24V bridging contact supply
Plug-In link continuous jumper
for additional system components
3 GND/0V terminal power input
4 GND/0V bridging contact supply
Plug-In link continuous jumper
for additional system components
5 Alarm 13, 14 terminals for control output
(potential-free signal output)
6 90-% 23, 24 terminals for control output
(potential-free signal output)
7 ON terminal for control input
8 CTRL terminal for control input
9 Internal system connection
To Next Page
Loading...