Operation
User manual 9000-41011-0200000_hdb_en_20 77 / 92
7 Operation
NOTE
Use a short circuit-proof power supply unit.
NOTE
The voltage generated at the output is not allowed to remain higher than the
input voltage.
NOTE
Parallel connection of multiple load branches for increase of power is not per-
mitted with fix or flex modules.
NOTE
5 seconds after a shutdown due to overload, the consumer circuit (channel)
can be switched on again.
NOTE
Use only in connection with Mico Pro system components!
NOTE
The product may cause audible noise.
7.1 Overview
7.1.1 Mico Pro PS (power supply)
Fig. 7-1: Operation overview
1 Power LED indication
2Alarm LED indication
3ON terminal
4 90-% 23, 24 terminals
5 Alarm 13, 14 terminals
6CTRL terminal
To Next Page
Loading...