MUTOH DrafStation RJ-900X User Manual

RJ-900X series OPERATION MANUAL Before using
3-17
4. Set the roll media to the media feed slot.
NOTE
• If the roll media end gets loosen, perform loading after properly winding the media.
• If it is not straight when loading the new roll media, cut the front edge of the roll media.
For roll media cutting method, refer to "
4.6.3 Cut media".
5. Open the front cover, and pull out the roll media.
No. Name
1
Roll media
2
Media feed slot
No. Name
1
Front cover
2
Roll media
1 2
2
1

MUTOH DrafStation RJ-900X Specifications

General

Brand	MUTOH
Model	DrafStation RJ-900X
Category	Printer
Language	English