Page 12/19 AP-76942_Rev 1.0
5 Cleaning the printer
Periodic (every month) cleaning is necessary to keep the printer in good condition.
Cleaning the outer case
Wipe out dust and dirt attached to the outer case by using a soft cloth.
Cleaning the inside of the printer
Step 1: Open the front cover.
Step 2: Remove paper powder and dust attached to the pressure rollers using a soft brush.
Do not blow paper powder inside the printer using tools such as an air duster.
It may cause an abnormal noise from the inside of the printer.
Important
Do not insert or drop metal or flammable objects into the printer through openings
such as a vent.
It could lead to an electric shock or fire.
If foreign substances or liquids such as water entered the printer, do not use the
printer as it is.
It could lead to an electric shock or fire.
Immediately turn OFF the power switch, disconnect the power plug from the
electric socket, and contact your local MUTOH dealer.
When cleaning the printer, be sure to turn OFF the power and disconnect the
power plug.
Do not use volatile solvents such as thinner, benzene, or alcohol.
These solvents could damage the paint.
Be careful that no moisture enters the printer.
There is a possibility that the electric circuit inside the printer is short circuited.
Do not open covers attached using screws under any circumstances.
This may cause an electric shock or a malfunction.
No. Name
1 Pressure rollers
To Next Page
Loading...
Need help?
General