5 Troubleshooting VJ-1624 QUICK REFERENCE
5-2
5.1 When you cannot generate graphics in the way
you want
This section explains how to restore printing results that are blurred or have gaps and how to adjust print
quality.
5.1.1 Perform Head cleaning
If the nozzle check result indicates that the checked points are blurred or missing, clean the print head.
1. Turn ON the printer and load the roll media.
3.5.2 Setting Roll Media
2. Confirm that the printer functions normally.
3. Press the [Nozzle Check] key on the operation panel for at least 2 seconds.
• Perform the nozzle check printing.
4. Check the print sample and confirm that the checked points are blurred or missing.
5. If the nozzle check result indicates that the checked points are blurred or missing, clean the head.
4.2.3 Head cleaning
To Next Page
Loading...
Need help?
General