VJ-1324 OPERATION MANUAL Before using
3.3 Installing ink cartridges 49
NOTE
• When performing head cleaning again before ink charge, press the [+] or [-] key on the operation
panel to select "Yes", and press the [Enter] key to perform head cleaning.
6. Press the [Enter] key on the operation panel.
• "Insert InkCartridges" is displayed on the operation panel.
7. Take out the ink cartridge from the bag and shake it gently two to three times and insert it into the
printer.
• Make sure that the ink cartridges are inserted into the correct slots.
Match the mark in front of the slot and the color of the ink before inserting the ink cartridge.
• Keep mark of the ink cartridge facing up and insert towards the printer side.
• Insert the ink cartridge all the way to the end of the slot.
• "Ink Refill **%" is displayed on the operation panel and initial ink charge starts.
No. Name
1 Ink cartridge
2 Ink cartridge slot K
3 Ink cartridge slot C
4 Ink cartridge slot M
5 Ink cartridge slot Y
2 3 4
5
1
To Next Page
Loading...
Need help?
General