• When you press the [Cancel] key on Operation panel, the display returns to "Adj.3: Adj.
PatternALL".
7. Press the [Enter] key on Operation panel.
• Determines the setting.
8. Enter the values for patterns B to D in the same way.
• Press the [Enter] key to set the value.
• Once all set values have been entered, press the [Enter] key to register the set values of patterns
A to D.
• "Adj.3: Adj. PatternALL" is displayed on Operation panel.
3.7.2.3.2 Individual Adj. pattern
Print one adjustment pattern from A to D and register the set value.
The following describes how to adjust pattern A only.
1. Display the Custom Adjust Print menu on Operation panel in the same way as Step 2 of
3.7.2.1 Custom confirmation pattern.
2. Press the [+] key or [-] key on Operation panel to select "Adj4: Adj. PatternA".
To Next Page
Loading...
Need help?
General