Before using VJ-1617H OPERATION MANUAL
3-120
3. Press the [Enter] key on Operation panel.
• "Warming Up Skip ->E" is displayed on Operation panel.
• Press the [Enter] key on Operation panel to start printing during warming up.
4.4.6 Starting printing during warming up
• An adjust print pattern is printed.
• For the Adjust print pattern, the same petterns will be printed repeatedly on both sides and center
of the media.
4. Check the print results on both sides and center of the media and select the number that looks most
aligned between 1 and 7.
• "6" is selected in the next printing sample.
To Next Page
Loading...
Need help?
General