Maintenance VJ-1617H OPERATION MANUAL
6-20
• When all High-capacity ink pack adapters are installed, "Busy-Washing" is displayed on
Operation panel, and the printer starts charging Cleaning liquid.
• When Cleaning liquid has been charged, "Remove Cartridges" is displayed on Operation panel.
13. Remove all High-capacity ink pack adapters.
• Leave the cleaning fluid packs still installed on High-capacity pack adapters.
• "Ink Discharging" is displayed on Operation panel and the printer starts head cleaning.
• After head cleaning is complete, "Check waste fluid" is displayed on Operation panel.
• Check Waste fluid tank.
14. Press the [Enter] key on Operation panel.
• "Insert CleaningCart." is displayed on Operation panel again.
15. Insert High-capacity pack adapters, with the cleaning liquid packs still installed, into the ink
cartridge slots again.
• When all High-capacity ink pack adapters are installed, "Busy-Washing" is displayed on
Operation panel, and the printer starts charging Cleaning liquid.
• After charging the cleaning liquid, "[ALL]Discharged" is displayed on Operation panel.
No. Name
1 High-capacity adapter
To Next Page
Loading...
Need help?
General