VJ-1617H OPERATION MANUAL Maintenance
6-53
• "Cleaning **%" is displayed on the operation panel.
• After Head cleaning is complete, the operation panel shifts to Normal.
• If blurs or lacking parts in printed media do not disappear with one time of Head cleaning, perform
Long cleaning.
• If blurs or lacking parts in print result do not disappear even after performing head cleaning several
times, perform "Little charge" or "Initial ink filling" from Cleaning menu of Panel setup menu.
5.5 Cleaning menu
• If blurs or lacking parts in printed media do not disappear with several times of Head cleaning, refer
to
7 Troubleshooting, and take appropriate measures.
To Next Page
Loading...
Need help?
General